The Father Of Roman Fountain Design

be_24__42133.jpg There are many renowned Roman water features in its city center. One of the best ever sculptors and artists of the 17th century, Gian Lorenzo Bernini fashioned, conceptualized and built nearly all of them. His skills as a water feature developer and also as a city designer, are observable all through the avenues of Rome. Bernini's father, a renowned Florentine sculptor, mentored his young son, and they ultimately moved to Rome, in order to fully express their art, primarily in the form of public water fountains and water features. The young Bernini earned compliments from Popes and relevant artists alike, and was an diligent worker. His sculpture was originally his claim to fame. Most particularly in the Vatican, he made use of a base of knowledge in ancient Greek architecture and melded it flawlessly with Roman marble. Though many artists impacted his artistic endeavors, Michelangelo inspired him the most.

A Fabulous Example of Roman Talent: The Santa Maria in Cosmedin Water Fountain

Archaeologists and restorers alike have stumbled upon a wealth of heathen and Christian artifacts on the grounds of Santa Maria in Cosmedin in Rome. The nearby basilica is largely renowned for the marble sculpture known as the Bocca della Verità, (Mouth of Truth) located in its entryway. Since the Santa Maria in Cosmedin fountain (1719) was located off the beaten track, it remained relatively unknown. The part of town where it was located was forlorn and uninviting which generally kept people away. It was a this time that Pope Clement XI commissioned the Italian architect Carlo Bizzaccheri to put up a water fountain to renovate the square outside the church of Santa Maria in Cosmedin. Work on the church's infrastructure began on on August 11, 1717. After blessing of the first stone, medallions with the illustration of the Blessed Virgin, for whom the church is named, and of St. John the Baptist, the patron saint of water, were thrown into the foundation.

Keep Your Large Outdoor Fountain Clean

Water fountains will last a very long time with routine cleaning and maintenance. Leaves, twigs, and bugs often find their way into fountains, so it is important to keep yours free from such things. Also, algae is likely to build up anywhere natural light meets water. To avoid this, there are some simple ingredients that can be mixed into the water, such as vinegar, sea salt, or hydrogen peroxide. Another option is to blend bleach into the water, but this action can hurt wild animals and so should really be avoided.

Every 3-4 months, garden fountains should undergo a serious cleaning. First you must remove the water. When you have done this, wash inside the water reservoir with a gentle detergent. Feel free to use a toothbrush if necessary for any tiny crevasses. Make sure all the soap is properly cleaned off.

Make sure you get rid of any calcium or plankton by taking the pump apart and cleaning the inside properly. Letting it soak in vinegar for a few hours first will make it much easier to clean. If you want to eliminate build-up in your fountain, use rain water or mineral water rather than tap water, as these don’t contain any elements that will stick to the inside of the pump.

One final recommendation for keeping your fountain in top working shape is to check the water level every day and make sure it is full.

Allowing the water to reach below the pump’s intake level, can cause severe damage and even make the pump burn out - an undesired outcome!

The Best Way to Hang a Wall Fountain

Make any room much better with a wall fountain. The effects of the water sounds include providing serenity and calm to the room. People tend to place their wall fountains in foyers, but, in fact, they can be a wonderful addition to any room where everyone congregates. Although each model might have slight differences on how to hang it, the basic instructions are the same for all. There are normally several pieces that need to be put together. The base and the upper section will need to be put together as well as the pump and the tubing. Do not forget to review the guidelines before getting started in order to avert errors. It is normally a quick and easy procedure. Keep in mind, though, that each design might require a slight adjustment. Have a colleague hold the wall fountain in the desired place, then mark the wall as necessary. A level is the best tool to ensure it is hung correctly. Mark the position where you want the top of the wall fountain as well as the lower part.

There is more than one method to install a wall fountain. You can insert the screws in the wall and glide them into the slots on the back of the wall fountain. A second option is use brackets secured on the wall. The second option is better suited, especially for larger wall fountains. Put a mark on the wall where the brackets will best go on your wall fountain. Bore pilot holes in the wall where you need to set the drywall anchors. Gently hammer the anchors into the wall. Use a cordless drill or a screwdriver to attach the brackets, making sure they are straight. Install your wall fountain by fastening it onto the brackets. Be certain that it is perfectly straight and not loose. If the alignment is correct, it’s time to add water. There must be sufficient water to cover the water pump. It is now time to plug it in and watch the water trickle. Gently add more water until it comes within an inch of the top of the basin. The basin will overflow when the pump is switched off if it’s too full, so be sure not to fill it completely. When the pump is turned off the water all settles at the bottom of the basin, causing the water level to rise. The water will overflow and cause property damage if your wall fountain is too full.

Sculpture As a Staple of Classic Art in Ancient Greece

Up right up until the Archaic Greeks developed the very first freestanding sculpture, a phenomenal triumph, carvings had largely been completed in walls and pillars as reliefs. For the most part the statues, or kouros figures, were of young and nice-looking male or female (kore) Greeks. The kouroi, regarded by the Greeks to portray beauty, had one foot extended out of a rigid forward-facing pose and the male statues were regularly unclothed, with a compelling, powerful build.

Life-sized versions of the kouroi appeared beginning in 650 BC. The Archaic period was turbulent for the Greeks as they evolved into more polished forms of government and art, and obtained more information about the peoples and cultures outside of Greece. But in spite of the issues, the Greek civilization went on to progress, unabated.


The Early, Unappreciated Water-Moving Alternative
In 1588, Agrippa’s water-lifting invention captivated the interest and compliments of Andrea Bacci but that turned out to be one of the final mentions of the gadget. It could be that in 1592 when... read more
The Origins Of Fountains
Modern-day fountains function mostly as decoration for public spaces, to honor individuals or events, and enhance entertainment and recreational activities. read more
The Advantages of Solar Outdoor Garden Fountains
It is essential to ensure that air is always moving over the top of the water. It is the nature of fountains and waterfalls to produce cool, fresh air.... read more