Tips for Installing a Wall Fountain

Improve nearly any space with the addition of a wall fountain. A waterfall will bring a sensation of peacefulness with the comforting sounds of moving water. People tend to hang wall fountains in any space where folks gather, but most commonly in entryways. a-395__65861.jpg Even though each model might have slight differences on how to install it, the basic directions are the same for all. Set-up will include putting together various components. Once you connect the foundation and the top you will then need to attach the pump and the water tubes. The directions should be read first to make sure it is assembled right. The set-up technique is quite simple to grasp. Keep in mind, though, that each model might need a slight change. Do not hesitate to get someone to assist you to hold the wall fountain in the right spot while you make a tiny mark on the wall. The easiest way to ensure it is installed correctly is to use a level. Draw your markings at both the top and the bottom. Wall fountains can be mounted in more than one way. The first is to use screws which you slide directly into the holes on the back. A second option is go with brackets installed on the wall. The bracket option is best, especially for wall fountains that are big and heavy. Decide where the brackets need to be positioned and mark the wall as required. Drill pilot holes in the wall for the drywall anchors. Affix the anchors by attentively hammering them into the wall.

Use a cordless drill or a screwdriver to install the brackets, making sure they are straight. The wall fountain is ready to be mounted onto the brackets. Check to be certain it is both secure and level. If the alignment is correct, it’s time to put in water. There should be enough water to cover the water pump. At this point plug it in and the water will start to circulate. The water basin should be filled to about one inch below the top end. The basin will overflow when the pump is off if it is too full, so be careful not to fill it completely. The water level will rise since it all settles at the bottom of the basin if not being pumped. Harm can be be the result if the water is overly full and spills down your wall.

The One Cleaning Solution to NEVER Use On Your Large Garden Fountains

It is vital to carefully maintain water fountains for them to function properly. It is easy for foreign objects to find their way into open-air fountains, so keeping it clean is vital.

Another factor is that water that is subjected to sunlight is susceptible to growing algae. Either sea salt, hydrogen peroxide, or vinegar can be blended into the water to eliminate this problem. Bleach can also be dissolved into the water, however this is not the ideal option because it can sicken birds or other animals.

No more than 3-4 months should go by without an extensive maintaining of a fountain. Before cleaning, all the water must be removed. Once it is empty, scrub inside the reservoir with a gentle cleanser. Feel free to use a toothbrush if necessary for any smaller crevasses. Do not leave any soap deposits inside of or on the fountain.

Calcium and fresh water organisms can get inside the pump, so you should disassemble it to get it truly clean. Soaking it in vinegar for a while will make it easier to clean. Build-up can be a big headache, so use mineral or rain water over tap water, when possible, to prevent this dilemma.

And finally, make sure the water level is continuously full in order to keep your fountain operating smoothly. Low water levels can damage the pump - and you do not want that!

The Newest Inclusion to the Chatsworth Gardens: "Revelation" Fountain

“Revelation,” the latest acquisition to the decorative garden fountains of Chatsworth, was designed by recognized British sculptor Angela Conner. The now deceased 11th Duke of Devonshire mandated her, due to her work in brass and steel, to design a limited edition bust of Queen Elizabeth in commemoration of the Queen’s 80th birthday bash. In 1999 Revelation was installed in Jack Pond, one of Chatsworth’s earliest ponds. The four big steel flower petals open and close with the circulation of water, alternately concealing and revealing a golden globe at the sculpture’s center. The sculpture’s proportions are five meters in height by five meters in width and features a metal globe coated with gold dust.

This most recent water fountain is an intriguing addition to the Gardens at Chatsworth because the petals’ movement is totally driven by water.

Tips for Choosing the Perfect Fountain for Your Needs

It is vital to consider how a water fountain will fit into your garden before buying one. Any high-traffic spots such as driveways, entryways, or roundabouts are perfect spots to install one.

If you choose to put yours against a wall, there are fountains designed especially for this purpose. They can be secured against a wall, post, or fence by using a bar or a hook affixed to the back. Since the top part of your fountain is not stable on its own, ensure that it is secure against a wall to avoid damage caused by strong winds, wild animals, or other natural dangers.

In public places like parks where folks tend to sit and unwind for a few minutes, you will notice one other option – the garden sculpture style.

Reasons to Think About Installing a Pondless Fountain in your Backyard

The other name for a disappearing fountain is a “pondless” fountain. You do not see where the water comes from, as it is underground. Disappearing fountains add tranquil sound effects and striking visuals to any place where people get together. It is not hard to find the style that is right for you, as there are so many to choose from such as millstones, ceramic urns, waterfalls, and also those with granite columns.

Disappearing fountains also offer many benefits. Since the water source is underground, there is no open water to pose a danger to those around it. As such, it is okay for children to play near it. Additionally, since the water is held underground, none of it is lost to evaporation. Other sorts of fountains use up more water due to evaporation. The time you spend on maintenanceis also minimized since algae does not grow underground and debris can not get into the water source. Finally, due to its more compact size, it is easier to install it where you want it than other types of fountains.


Ancient Greece: The Roots of Garden Statue Design
Most sculptors were paid by the temples to enhance the elaborate pillars and archways with renderings of the gods right up until the period ... read more
The Defining Characteristics of Ancient Greek Statues
Archaic Greeks were renowned for creating the first freestanding statuary; up till then, most carvings were constructed out of walls and pillars as reliefs. Younger, attractive male or female (kore) Greeks were the subject... read more
"Primitive" Greek Art: Outdoor Statuary
Up right up until the Archaic Greeks created the first freestanding statuary, a phenomenal achievement, carvings had primarily been accomplished in walls and pillars as reliefs. Younger, ideal male... read more
A Solar Powered Large Outdoor Fountain
This kind of fountain demands less upkeep than others. Clogs are avoided since there is no motor - which means less cleaning. Which ultimately means more time to relax... read more