Keeping Your Landscape Fountain Clean

It is important to carefully maintain water fountains for them to perform optimally. A common problem with fountains is that they tend to accumulate dirt and debris, so it is vital that you keep it free from this. Also, algae is likely to build up anywhere natural light meets water. ft_151__48029.jpg To prevent this, there are some basic ingredients that can be poured into the water, such as vinegar, sea salt, or hydrogen peroxide. Bleach can also be dissolved into the water, however this is not an ideal option as it can sicken birds or other animals.

A thorough cleaning every 3-4 months is recommended for garden fountains. Before you start cleaning, all the water must be eliminated. Next use gentle and a soft sponge to clean inside the reservoir. If there are any little grooves, use a toothbrush to reach every spot. Make sure all the soap is completely rinsed off.

Make sure you get rid of any calcium or plankton by taking the pump apart and cleaning the inside carefully. To make it less challenging, soak it in vinegar overnight before cleaning. If you want to minimize build-up in your fountain, use rain water or mineral water versus tap water, as these don’t contain any elements that will stick to the inside of the pump.

One final trick for keeping your fountain in top working order is to check the water level every day and make sure it is full. Low water levels can damage the pump - and you don't want that!

Builders of the First Water Fountains

Often serving as architects, sculptors, artists, engineers and discerning scholars, all in one, fountain creators were multi-talented individuals from the 16th to the later part of the 18th century. Throughout the Renaissance, Leonardo da Vinci exemplified the creator as a inspired genius, creator and scientific expert. The forces of nature led him to explore the properties and movement of water, and due to his fascination, he methodically captured his experiences in his now renowned notebooks. Converting private villa configurations into innovative water exhibits packed of symbolic significance and natural beauty, early Italian water feature designers coupled creativity with hydraulic and horticultural abilities. The magnificence in Tivoli were created by the humanist Pirro Ligorio, who was widely known for his capabilities in archeology, architecture and garden design.

For the various properties close to Florence, other water feature designers were well versed in humanistic subject areas as well as ancient technical texts, masterminding the phenomenal water marbles, water attributes and water antics.

Easy-to-Fallow Tips to Hang a Wall Fountain

Any room will benefit from the inclusion of a wall fountain. The calming sound of the waterfall will de-stress and sooth. People tend to hang wall fountains in any area where folks hang out, but most commonly in entryways. The best way to mount one depends on the model, but the standard technique is the same. Assembly will include putting together various components. First you should attach the bottom to the upper portion, then connect the pump and the tubing. It is advisable to carefully review the directions before you start the assembly process. It is normally a straight-forward procedure. That said, there can be small differences depending on the design you have. Have a colleague hold the wall fountain in the desired location, then mark the wall as necessary. A level is the best tool to ensure it is installed straight. Mark the position where you want the upper end of the wall fountain as well as the lower part.

Wall fountains can be hung in a couple of ways. You can place the screws in the wall and glide them into the slots on the back of the wall fountain. A second option is go with brackets installed on the wall. This alternative tends to be suggested for heavy wall fountains. Put a spot on the wall where the brackets will best go on your wall fountain. Bore pilot holes in the wall where you need to set the drywall anchors. Place the anchors in the wall with a hammer. Affix the brackets by ensuring they are level and then screwing them into the wall using a drill or screwdriver. It is finally time to place your wall fountain onto the mounting brackets. Be certain that it is perfectly straight and not loose. Add some water once the wall fountain is mounted. Make certain there is sufficient water to cover the pump. The water will begin to circulate as soon as you plug in your fountain. The water basin should be filled to around an inch below the top end. Never fill the basin all the way to the top or it will overflow when the pump is not on. The water level will rise because all of the circulating water will settle down at the bottom of the basin. When there is too much water, it will spill out and can harm your floor and furnishings.

Outdoor Water Features Found in Historical Documents

The water from springs and other sources was initially supplied to the citizens of nearby communities and cities through water fountains, whose purpose was mainly practical, not artistic. To produce water flow through a fountain until the end of the 1800’s, and produce a jet of water, mandated the force of gravity and a water source such as a creek or reservoir, positioned higher than the fountain. Typically used as monuments and commemorative edifices, water fountains have impressed men and women from all over the planet throughout the centuries. Rough in design, the very first water fountains didn't appear much like present fountains. A stone basin, carved from rock, was the very first fountain, used for holding water for drinking and religious purposes. Natural stone basins as fountains have been recovered from 2,000 B.C.. Early fountains used in ancient civilizations depended on gravity to manipulate the circulation of water through the fountain. Located near aqueducts or springs, the functional public water fountains supplied the local citizens with fresh drinking water. Fountains with embellished Gods, mythological beasts, and animals began to appear in Rome in about 6 B.C., crafted from natural stone and bronze. Water for the communal fountains of Rome was delivered to the city via a complex system of water aqueducts.

Aspects of Outdoor Statuary in Archaic Greece

The Archaic Greeks developed the 1st freestanding statuary, an amazing achievement as most sculptures up until then had been reliefs cut into walls and pillars. Most of the freestanding statues were of youthful, winsome male or female (kore) Greeks and are termed kouros figures. Symbolizing beauty to the Greeks, the kouroi were designed to appear stiff and typically had foot forward; the males were healthy, strong, and nude. In about 650 BC, the varieties of the kouroi became life-sized. Throughout the Archaic time, a big time of changes, the Greeks were developing new types of government, expressions of art, and a greater comprehension of people and cultures outside Greece. During this time and other durations of historical tumult, clashes often occurred, among them battles fought between city-states such as the Arcadian wars and the Spartan infiltration of Samos.


The Beneficial Effects of Water Features on Your Cherished Pets and Flying Visitors
Dogs are attracted to fountains mainly because they provide another source of water. During hot months of summer, cats and dogs will be outdoors for the absolute ... read more
Suggestions for Picking the Perfect Water Fountain for Your Needs
The garden sculpture style, yet another option, is lovely for parks or any place people tend to hang out to enjoy the fresh air and vistas. read more